← all posts site ↗

replicating control's hiss effect in unity

the hiss effect from remedy's control is this wispy chromatic aberration and screen distortion that creeps in during supernatural moments. it's got that analog TV signal degradation look with color channel separation and subtle noise. trying to find the unity equivalent means looking at post-processing stacks since it's a screen-space effect not tied to specific geometry.

the core components are chromatic aberration which splits the RGB channels slightly creating that colored fringe, combined with film grain or noise for the analog texture. control also uses barrel distortion to warp the screen edges slightly, and some vignette darkening at the corners. in unity's post-processing stack v2 you can layer these effects: enable chromatic aberration with low intensity around 0.1 to 0.2, add film grain at about 0.3 intensity, throw in a barrel distortion with strength 0.05, and finish with a subtle vignette.

the trick is animating the intensity over time so it creeps in and out rather than being constant. a simple sine wave or noise-based animation on the chromatic aberration intensity parameter makes it feel organic and unpredictable. unity's new URP post-processing has built-in chromatic aberration and film grain effects, and for the barrel distortion you might need a custom shader or the distortion post-process from a package like post-processing-urp.

if you want the exact control look you'd probably need to research their actual implementation since they use northlight engine not unity, but the unity post-processing stack gets you 80 percent of the way there. the key is keeping all the individual effects subtle and layered rather than cranking one effect too high. chromatic aberration at 0.15, film grain at 0.2, barrel distortion at 0.03 — it's the combination that sells it, not any single effect.