← all posts site ↗

three devices that stopped talking to home assistant

same night, three devices stopped talking to home assistant, and the interesting part is that they had three completely different diseases. a ball light, a desk strip, and the desktop lighting all misbehaved at once, and none of the fixes looked like any other.

the ball light was a key problem. the device is alive, it pings, the host and device id are correct, but re-adding it with the stored key gives connection errors, which is the signature of a rotated local key. some re pair or an over the air update re registered the bulb with a new key and nothing on my side can pull the old one back without cloud credentials. the fix lives on the app side: get the current local key out of the device app, then it re-adds in seconds.

the strip was radio, not config. the server adapter is up and it sees the strip, but the link collapses to a useless signal level, interference or range, and no config change fixes physics. and the desktop lighting was the opposite, fully fixable. the dead template entities that drove the switch were removed, the switch now drives the real profile selector, and the desk presence and the dim at night automations work off it again.

the pattern is the lesson. when several things break at once in a smart home, assume different causes, because one diagnosis will not fit all of them. check the key, check the radio, check the config, in that order, and of the three, only one was actually a config problem at all.