← all posts site ↗

the one press pill dispenser

trying to design a pill dispenser for the supplement shelf. a bunch of different capsules, thin ones and fat ones, big ones and small ones, each in its own bottle, and i wanted one container per thing where you press a button and one pill drops out. the first pass was the usual rotating drum with a pocket that catches a single pill and carries it down to an exit. press the button, a pawl turns the drum, the shell closes over the pocket so the pill can't slip out sideways, and it lands in a tray. it works in theory and it looks fun, but it has the problem that every rotary design has.

rotation was never the hard part. the drop is. every rotary design puts the outlet under the hopper, so the machine has to be tall, and a tall machine means your hand goes underneath it. that's why everything i found in the reference hunt reads as wall mounted. the nice revolver style dispensers people have published, they're all tall boxes you reach under or spin from the bottom. nobody really solved it, they just accepted the height.

the pull up box that i half liked gave me the answer. it is a sliding gate, not a drum. make the gate horizontal and the button is just the end of the plate. you press in, the gate slides, the pill drops straight into your hand at counter height, nothing tall, nothing on a wall. the mechanism is dead simple and there is no second pill to worry about, one pocket means one pill. what's left is the spring that pushes the gate back, and printed springs are their own rabbit hole of serpentines and material choices.

the cardboard demo got the motion right, which means the geometry is right and the remaining work is print tuning. now i just have to print it twice and feel it.