dug out an old 75% mechanical keyboard that's been functionally useless since the full-size wireless took its job. it has all its switches, a battery inside, bluetooth. so the question: does it become anything, or does it stay in the drawer.
the answer is a macro deck, and the trick everyone gets wrong is that none of the work is hardware. the board stays one hundred percent intact — config files scope bindings to that one device only, so the main keyboard keeps typing normally and the old one becomes a grid of commands. per-device remappers exist on both platforms, and they treat a full keyboard exactly like a macropad, which it is. every example post you find online of repurposing involves harvesting keys and soldering them into a new control board, and that's the misleading part: with per-device config, the whole keyboard already is the macropad, zero soldering.
then placement, which is the argument that actually matters. a second keyboard-width slab next to the main keyboard is dumb. the right spot is the wall next to the monitor, angled toward the chair, held up by the same command strips everything else hangs from. bluetooth plus the built-in battery means no cable run. print a frame with a tilt so the caps read from the chair, swap in relegendable caps, and each key becomes a labeled button for the room: lights, tv, the kettle, one-key prompts into the assistant. voice is bad at instant repeated toggles; a physical key is perfect at them.
worst case it's still just a keyboard you can use again. that's what makes this project safe.