tried ironing flexible TPU prints onto white t-shirts to see if the thermoplastic polyurethane would bond with the fabric like a heat-transfer vinyl. TPU is the same material used for flexible filament in 3D printing so the idea was to print a design, place it on the shirt, and iron it on at the right temperature to create a permanent bond.
the problem is TPU doesn't have an adhesive backing like HTV does. HTV has a heat-activated glue layer that melts and bonds with fabric fibers. TPU is just solid plastic. ironing it onto fabric just melts the TPU slightly making it stick temporarily through surface tension but it peels off after the first wash. you need actual adhesive or a different approach.
alternatives: print the design on HTV material instead which is designed for this exact purpose. HTV comes in sheets you cut with a vinyl cutter or print with an inkjet printer, then iron on at around 300 fahrenheit with firm pressure for 10-15 seconds. for custom 3D printed designs you could print with PLA then use fabric glue or textile adhesive to bond it to the shirt, but that's not as clean. or just buy pre-made heat transfers and skip the 3D printing route entirely for wearable designs.
the 3D printed TPU approach would only work if you could embed adhesive into the print somehow, like printing with a dual-extrusion setup that lays down adhesive filament alongside the TPU. but that's overcomplicating it. HTV is the right tool for this job and 3D printing isn't really meant for fabric bonding without additional adhesives.