← all posts site ↗

i bootlooped my tiny bluetooth badge

bought one of those cheap circular badges from an import site, the kind with a screen and bluetooth and shit vendor software. the plan was to drive it myself, show my own stuff on it, maybe a gif. tapping it shows a qr code and a mac address, so bluetooth was the way in.

identified the chip over the link: a small round display, a firmware version string, a serial, and an auth handshake that accepted the community key but refused a flash dump. the standard reset frame got sent twice while it sat in charge mode, where the app is alive. this firmware does not acknowledge reset commands, but the frames went through.

it did not reset. it now boots to hello and then goes black and then hello again. forever. the charging state still draws its ui, so the app runs fine and the corruption is in the path that loads the normal face. buttons do nothing on a long press. there is a pinhole on the case that is not a reset button. the charging base has only two magnetic pins, so it carries power and no data, which means the chip never enumerates on a computer at all.

so the badge is bricked by my poking and the only real recovery path needs the case open. the rest of that story is a separate post, because it went deep.