asked about food contact and printing again, this time for a tiny catch that clips on the rice bowl rim while washing so the grains stay in. the verdict did not change: do not print that part. no print is certified for food contact and the layer lines are the real problem, not the plastic. the valleys between lines hold water and food, biofilm survives a normal wash, and the nozzle can shed trace metal into the melt. filament compliance is not part compliance, no regulator certifies the process itself.
safe zone is dry short contact. a cookie cutter, a dry scoop, fine. repeated wet contact is not, and this part sees water every day. then the search came back with the other half of the story: somebody already printed this exact thing. a half moon drain lid that clamps to the bowl rim and keeps the grain in when you tilt, plus a couple of generic rim strainers. nice models, same food contact argument though.
the buy option won anyway. a stainless bowl with a side only drainer does the job better than any print and has no bacteria problem at all. and on bio materials, the best compostable filament is PHA, but even the maker says not for food contact. sometimes the answer is just buying the steel.