← all posts site ↗

a desk pet that is a lamp ghost

wanted a desk pet, maybe something with wheels, though i doubted why, maybe small servos and a little oled. pushed back on the wheels first. locomotion is the wrong axis: batteries, charging, falling off the desk, noise. it's a gimmick and i said so. the actual move is a head and eyes that mirror my agent's state, drawing on the same home assistant entities the led notifier already uses.

the taste engine pulled my saved aesthetic and the direction wrote itself. a mini gooseneck lamp with a walnut base, thin stem, bell-shaped translucent shade. the face is just two dark circles cut into the shade, negative space. no printed face, no screen blob. pareidolia does the animating, the face exists only because the light is on. one tiny servo pivots the whole shade up when curious, down when focused. colors follow state. amber and golden hour for idle, pink and purple when thinking. a small oled scrolls text like thinking or done, so it's mine more than a toy. all parts i already own.

then the retrofit question, because there's an existing lamp. can i bolt a high torque servo on the joints and hang a display near the top with a smart bulb? the physics decides. the head joint just behind the shade is short-lever, an easy case for a metal gear servo. the long arm joints are a different story. a spring-balanced arm means static weight is already carried by the springs, so fighting the springs with a servo is a burned servo. servo the head tilt and the base swivel, the two joints the springs don't balance. and the smart bulb stays on its own entity, the esp never touches it. the only real gotcha is routing the bulb's power wire through the moving head joint with a service loop. the finished look is bare springs exposed as the mechanism, not boxed.