home assistant flashed up that it needed a bluetooth integration. not a config problem at all. the kernel log showed the usb bluetooth controller had crashed thirty six times since the previous day, a hardware error every time, with the same exception fetch failure. the controller had stopped answering the bluetooth stack, and a broken scan operation was left stuck open, so home assistant saw operation already in progress every time it asked for anything.
on top of that, the controller's usb port had autosuspend enabled, so the adapter could fall asleep and never come back right. fixed it by restarting the bluetooth service, powering the controller back on, restarting home assistant, and disabling autosuspend for that specific device. then a udev rule so it survives reboots instead of needing another manual poke every time.
same window, a separate gremlin: a ball light that was visibly on but reported unavailable. the local tuya integration was failing its encrypted handshake with a key verification error. not a network thing either, the device answered ping and its port was open. a physical power cycle fixed it and the light came back. sometimes the hardware reset button wins where every software retry fails.