← all posts site ↗

the 5 by 2 touch screen that doesn't exist

wanted a small rectangular touch screen to stick beside my keyboard and turn into a macro pad, roughly five inches by two. it turns out the exact size does not exist as a product. five inch screens are almost square, and true bar screens that are tall and narrow start around eight inches. the bar shape without touch exists at five and a half inches, sure, but the touch is the whole point of a macro pad, so that was out.

for a while the smallest touch bar anyone sells was just under eight inches, and even that one reads more like a system monitor strip than the little thing in my head. i kept coming back to the same wall, nobody offers touch below that size, and the reason is probably that demand lives in the hardware monitor niche where a couple inches of width does not matter.

then the right shape surfaced as a maker board, an esp32 with a bar shaped touch lcd at basically the exact ratio i described, brand new and not shippable yet. that is the one that actually matches what i asked for, and being a microcontroller it can type keystrokes to the pc over usb on its own, no desktop app, no drivers, no hdmi rig.

the honest ending is i saved the product page and i will wait for it to go on sale, because every current alternative is either the wrong shape or missing the touch. the lesson is the same as a lot of hardware hunting, your exact spec is either discontinued or two weeks from announcement, and the disciplined move is to wait instead of settling for the wrong rectangle.