the two piece under desk drawer works fine except for one number: the bin is so shallow that half my stuff does not fit, everything is off by an inch or two. ripping out the whole system to buy a deeper kit felt wrong when the rails were already mounted and fine, so the plan became print one drawer body with extra height and slide it into the existing rails. the plastic bin dies, the hardware lives.
the model kept the original footprint and the top flange lips that the rails grip, plus the little divider slots inside, and added two inches of height. the flanges are the risky part because they were estimated from product photos, so the printed version becomes the test fit. if the rail grips too loose or too tight, the flange width and thickness are adjustable constants at the top of the parametric file. i also added a couple of horizontal ribs on the outside walls because taller thin walls want to flex.
the export came back as one solid component with the right bounds, so that part is verified even if the render of the preview was sad. the whole trick is modular: keep the rail system you already own and only replace the container. next failure mode is probably the flange fit, and when it is, it is one parameter away from fixed.