← all posts site ↗

a printed spring is a serpentine not a coil

designing a small light compression spring to print. petg is the right material — pla is too brittle and snaps after a few compressions, tpu is the only thing that beats it, and you only need that if you want the spring to squash almost flat. for a light push spring, petg is correct.

the shape was the actual question. first instinct was a coil, the textbook helix with four numbers. but the part this spring lives in wants a flat squishy thing, and that shape has names: wave washer first, and then the real match, the serpentine or accordion spring — a compliant mechanism, a flat strip folded back and forth. it prints flat with no supports and it bends in the plane that is the strongest direction a printer has.

the knobs are leg length, strip thickness, extrusion height, number of legs, and the u-turns, which have to be arcs — sharp corners crack first. stiffness falls off fast as legs get longer and thickness gets thinner, so small changes do a lot. printed plastic never matches textbook math, so print two or three sizes and feel them, then keep the one that pushes back right.